Video: Prepping Better Melt Preparers
The Molding 2022 conference concluded with a special half-day workshop and tour at the Polymers Center of Excellence.
Suhas Kulkarni leads a melt preparation workshop at the Polymers Center of Excellence in Charlotte, N.C. on Nov. 10 at the close of the Molding 2022 Conference.
On the final day of Molding 2022, the Polymers Center of Excellence in Charlotte, N.C. held a sold out tour and workshop. The workshop was lead by industry consultant and Plastics Technology contributor, Suhas Kulkarni.
Related Content
-
What to Do About Weak Weld Lines
Weld or knit lines are perhaps the most common and difficult injection molding defect to eliminate.
-
How to Set Barrel Zone Temps in Injection Molding
Start by picking a target melt temperature, and double-check data sheets for the resin supplier’s recommendations. Now for the rest...
-
Understanding the ‘Science’ of Color
And as with all sciences, there are fundamentals that must be considered to do color right. Here’s a helpful start.