Contact
Specialized Machine, Tool Achieve Record Levels of Cap Molding
NPE2024: Netstal says its CAP-Line injection molding machine running a 128-cavity z-moulds tool will produce 26-mm tamper-evident caps for still water in just a 1.9-second cycle.
Read More
Direct Communication, Control Between Cobots and IMMs
NPE2024: Universal Robot is showing how its Injection Molding Machine Interface (IMMI) module facilitates direct communication and control between its robots and molding machines.
Read More
Updated Control, Cooling Water Distribution, Electromechanical Ejector and Injection
NPE2024: Boy’s U.S. subsidiary marks its 50th anniversary in Orlando with six machines and U.S. intros for the Procan ALPHA 6 control, and hybrid ejectors and injection units.
Read More
Midtonnage Hybrid Range With Compact Footprint Launches
NPE2024: Milacron has the global launch of its new M-Series injection molding machine line featuring a large clamp stroke as standard in a line of midtonnage, compact-footprint machines.
Read More
Cooling Added to Compact Slide
NPE2024: CUMSA adds cooling to the Compact Slides (CS) line launched last year.
Read More
Hybrid Press Runs Larger Tools at Lower Tonnages
NPE2024: Nissei’s compact FWX Series combines a novel clamp design, low-pressure molding technology, and greater platen and tiebar spacing to enable large molds to run on lower tonnages.
Read More
System Simplifies Thread-Repair Insert Installation
NPE2024: C-Sert Manufacturing’s new installation system is designed to speed up the removal of damaged threads and the creation of a new pilot hole — 10 to 15 minutes per hole — with just four components.
Read More
Movable Tempering Stamp Can Eliminate Surface Defects
NPE2024: Incoe says Heat-Inject Technology introduces localized heat to remove weld or knit lines, or help melt flow into hinges, thin walls, delicate geometries or microstructures.
Read More
New Hybrid, All-Electric and Vertical Injection Molding Machines
NPE2024: In addition to new machines, LS Mtron is also launching a new 18-inch multitouch controller from Keba.
Read More
Hot Runner Temperature and Mold Motion Controllers Debut
NPE2024: Hot runner systems, temperature and motion controllers, an auxiliary injection unit and a gate seal are among Mold-Masters’ show features.
Read More
Low-Flow Indication and Metering in Injection Mold Cooling
NPE2024: Burger & Brown launches standard- and high-temperature Smartflow low-flow indicators, as well as a low-flow electronic flow meter.
Read More
All-Electric Press Gets U.S. Debut
NPE2024: For the first time, Arburg is making a global premier of a machine outside Germany with the new Allrounder 720 E Golden Electric among its 13 exhibits — seven in its own booth — in Orlando.
Read More
