Enhanced Temperature Controls for Hot Runners, Extrusion and Packaging
NPE2024: Athena introduces expanded hot-runner controller with up to 120 zones, plus updated panel-mount “universal” temperature/process control.
Share
Athena’s new Bedros XL hot-runner controller with large touchscreen handles up to 120 zones, versus up to 32 zones for the standard Bedros controller. Source: Athena Controls
At NPE2024, Athena Controls is showing off its broad line of temperature controls for a range of plastics processes. Among the newest items is the Bedros XL hot-runner controller. This expanded model handles 36 to 120 zones (versus 8 to 32 zones for the standard Bedros controller). It has a 12-inch touchscreen.
Also new is the 16CX universal single-loop, auto-tuning temperature/process controller for extrusion and packaging machinery. This updated 16 DIN-sized panel-mount model offers two independent field-configurable outputs.
Related Content
-
Troubleshooting Screw and Barrel Wear in Extrusion
Extruder screws and barrels will wear over time. If you are seeing a reduction in specific rate and higher discharge temperatures, wear is the likely culprit.
-
How to Select the Right Cooling Stack for Sheet
First, remember there is no universal cooling-roll stack. And be sure to take into account the specific heat of the polymer you are processing.
-
Roll Cooling: Understand the Three Heat-Transfer Processes
Designing cooling rolls is complex, tedious and requires a lot of inputs. Getting it wrong may have a dramatic impact on productivity.
