Collapsible Core Promises Long Service Life, Flexibility
DME's S-Collapsible cores can be configured as small as 6 mm or as large as 400 mm.
DME says its S-Collapsible core’s multiple segment configuration allows the system to be as small as 6 mm or as large as 400 mm. Besides rounds, different geometries, including ovals and squares can be incorporated into the S-Cores. Multiple cores can be integrated into one set of retaining plates to reduce spacing in between the units. Each core incorporates protective stops to prevent the folding segments from touching each other even if it has over traveled. DME will be exhibiting at Amerimold 2021 (Sept. 21-23; Donald E. Stephens Convention Center, Rosemont, Ill.)
DME’s S-Collapsible cores come in multiple configuration formats.
Related Content
-
Why Shoulder Bolts Are Too Important to Ignore (Part 1)
These humble but essential fasteners used in injection molds are known by various names and used for a number of purposes.
-
Where and How to Vent Injection Molds: Part 3
Questioning several “rules of thumb” about venting injection molds.
-
What You Need to Know About Leader Pins and Bushings
There’s a lot more to these humble but essential mold components than you might suspect. Following the author’s tips could save much time, money and frustration.
