Enhanced Temperature Controls for Hot Runners, Extrusion and Packaging
NPE2024: Athena introduces expanded hot-runner controller with up to 120 zones, plus updated panel-mount “universal” temperature/process control.
Athena’s new Bedros XL hot-runner controller with large touchscreen handles up to 120 zones, versus up to 32 zones for the standard Bedros controller. Source: Athena Controls
At NPE2024, Athena Controls is showing off its broad line of temperature controls for a range of plastics processes. Among the newest items is the Bedros XL hot-runner controller. This expanded model handles 36 to 120 zones (versus 8 to 32 zones for the standard Bedros controller). It has a 12-inch touchscreen.
Also new is the 16CX universal single-loop, auto-tuning temperature/process controller for extrusion and packaging machinery. This updated 16 DIN-sized panel-mount model offers two independent field-configurable outputs.
Related Content
-
Medical Tubing: Use Simulation to Troubleshoot, Optimize Processing & Dies
Extrusion simulations can be useful in anticipating issues and running “what-if” scenarios to size extruders and design dies for extrusion projects. It should be used at early stages of any project to avoid trial and error and remaking tooling.
-
The Importance of Barrel Heat and Melt Temperature
Barrel temperature may impact melting in the case of very small extruders running very slowly. Otherwise, melting is mainly the result of shear heating of the polymer.
-
How to Select the Right Tooling for Pipe Extrusion
In pipe extrusion, selecting or building a complementary set of tooling often poses challenges due to a range of qualitative factors. Here’s some guidance to help you out.
