KURZ Transfer Products LP Suppliers Showroom

Slimmer All-Electric Press Debuts

NPE2024: A slimmed-down version of Engel’s all-electric, e-mac injection molding machine is among eight displays, which also include LSR micromolding, quick mold changes and a cube mold.

Kurz Opens New Plant in Vietnam

The maker of decorative thin films invested 37 million euros in the new 60,000-m2 plant in Quy Nhơn, which joins regional production facilities in China and Malaysia.

Get Ideas from IMDA Award Winners In IML, IMD & In-Mold Electronics

Winners of the annual IMDA Awards Competition highlight aesthetics, functionality, sustainability—and even COVID-19 protection.

Decorating, Printing: New Decorating Technologies for Tubes and Injection Molding at K 2019

Digital metallic and multicolor decorating of squeeze tubes, combination hot-stamping and four-color printing machine, and large-area injection molding IMD were some of the news from Kurz at K 2019.

Decorating: New Way to Apply Touch Sensors to Plastic Parts

New Kurz roll-on technology for large-area sensors improves speed and quality, reduces cost. See it first at K 2019.

Automated Sensor Integration with Proprietary 'Functional Foil Bonding Process'

Kurz to feature economical automated process alternative to adhesives lamination for sensors.

K 2019 Preview: Injection Molding Goes for the ‘Green’

‘Circular Economy’ joins Industry 4.0 as common themes of injection molding exhibits in Düsseldorf.

Are You Up on the Latest in IML & IMD?

New technology for decorative and functional in-mold decorating will be featured at Molding 2019 Conference.

Headlines from Fakuma 2018

Integrating a special low-pressure process into machine controls; novel shop-floor quality-inspection technology; MES systems from machine and controls vendors; and sophisticated in-mold decorating.

Double IMD + IML Injection Molding To Be Demonstrated at Fakuma

Patented Kurz system, demonstrated by KraussMaffei, allows two independent single-image foils to decorate two mold cavities.

New Ionomer Decorative Effects Using Hot Stamping

DuPont collaboration with Kurz Group leads to golden or metallized effects.

DuPont & Kurz Collaboration Yields Golden or Metallized Effects

The development involved a foil that offers excellent adhesion to Surlyn ionomer.

Kurz, Engel and Lanxess Team for Decorated, Overmolded Continuous Fiber Sheet

A process to decorate a hybrid composite/thermoplastic part with a decorative film in one mold was among several new decorating technologies exhibited at K 2016 by The Kurz Group.

K 2016 Preview: Injection Molding

Adapting injection molding to the concept of Industry 4.0 is gaining momentum. At this show you’ll see that the interconnected, integrated “factory of the future” is almost here.

Engel Previews K 2016 Introductions

Advances in mold cooling, machine condition monitoring, and in-mold decorating will be key exhibits in Dusseldorf.

Headlines from the K 2013 Show

Here’s just a taste of the innovations on display, a selection of the top headlines not covered in our September show preview.

Decorating at K 2013

WEB EXCLUSIVE: Kurz debuts two systems, including a patented finishing process that decorates 3D geometries.

K 2010 Preview, Auxiliaries: Equipment of All Types Debuts This Month at K 2010

From materials drying, feeding, and blending to process heating/cooling, scrap reclaiming, testing, welding, and decorating—the K 2010 show this month in Dusseldorf, Germany, will have news in all categories of auxiliary equipment.

NPE 2006 News Wrap-Up: New Materials and Equipment for Decorating In and Out of the Mold

Among the latest developments in decorating and printing at the NPE show in Chicago were digital printers, flexographic printers for bags, and scratch-resistant heat-transfer foils for hot stamping and in-mold decoration (IMD). Also featured was new equipment for laser marking and engraving and an electrostatic charger for in-mold labeling (IML). News in stamping foilsSolidBrush metallic finishes are the latest heat-transfer foils from Kurz Transfer Products.

NPE 2006 News Wrap-Up: Injection Molding

Advances in electric drive technology were evident in nearly every injection machine builder’s booth in Chicago.

What to See at NPE 2006: Decorating, Printing and Finishing

While there is plenty of news at NPE this year in pad, screen, dry-offset, flexo, and inkjet printing, as well as laser marking, hot stamping, heat-transfer decorating, and some less familiar technologies—the real star of the show is summed up in two words: “in-mold.” Responding to excitement in automotive, appliance, and electronics industries, at least 19 companies are showing materials or equipment for in-mold film-insert decorating or labeling (IMD, IML) for injection molding and thermoforming.

NPE News Wrap-Up: Decorating & Painting

The Chicago show presented a whole new way to decorate. There were also plenty of improvements in ink-jet and pad printing, hot stamping, laser marking, and surface treating.