Products
Accumulator-Head Blow Molder for 2D or 3D Molding
Accumulator-head machine is suited to both standard and suction blow molding, and is equipped for Industry 4.0.
Read More
Turkey's Elastron Plans North American Production of TPEs
A very broad range of thermoplastic elastomer will be available from Elastron before year’s end.
Read More
New Water Transfer Printing Films and Training
Pioneer of water transfer printing TWN will show its latest developments and service offerings.
Read More
New-Generation Automatic Baggers for Blow Molded Containers
BM Series from And&Or forms bags from roll film and packs them with blow molded bottles.
Read More
Static Eliminator for High-Speed Webs
Eliminates static at distances of up to 5 ft. and speeds of 4500 ft./min.
Read More
Central Chiller Uses New Control To Maximize Cooling, Minimize Energy Use
Chiller calculates and uses the lowest allowable refrigerant pressure to maximize performance and deliver energy savings.
Read More
Smallest True Open-Air Plasma Surface Treater Launched
Lectro Engineering's new LT 2100VD surface treater is only 38 in. wide and 48 in. long.
Read More
Large-Neck Bottle Spin Trimmer Packs Higher Speed
MTM dual-belt spin trimmer handles large, neck-to-neck bottles at over 100 “logs” per minute.
Read More
Rocheleau Introduces Its Largest Reciprocating-Screw Blow Molder
Machine can produce six 1-gal containers or up to 16 smaller products.
Read More
Drying: Vacuum Drying Line Extended
New, intermediate-range model in the VBD line of vacuum resin dryers from Maguire.
Read More
Additives: New Additives for BOPP, Wire/Cable, FR Nylon
Dow Performance Silicones (formerly Dow Corning) has non-migrating slip additive for BOPP, an improved FR synergist for nylon; and a process aid for W&C.
Read More
Materials Handling: Networked Metal Separators Ready for Industry 4.0
Sesotec metal separators incorporate OPC-UA communications protocol.
Read More
