Ewikon Molding Technologies, Inc. Suppliers Showroom

Molding Solutions for Flexibility and Monitoring

NPE2024: Ewikon highlighting new hot runner nozzle and Smart Control system.

Multicomponent Mold Combines Capping and Unscrewing Functions for Pharma Closure

Braunform says its patented RotaricE² mold, which will mold Luer lock pharmaceutical closures in Arburg’s K 2022 booth, allows the use of one tool and one machine, versus two, while eliminating post-mold assembly.

Hot Runners: Multi-Tip Nozzle For Vertical Gating, Process Monitoring and LSR Cold Runner

At K 2019, Ewikon will unveil a new nozzle range for vertical multi gating, process monitoring tech and a cold runner for LSR molding.

Plentiful News in Hot Runners at Fakuma Show

More compact hot runners, even for large parts; smarter controls; unusual nozzle designs; remote mold monitoring; and a new source of LSR cold-runners.

News in Hot Runners & Tooling At Fakuma 2017 Show

Highlights included some unusual solutions to common problems, slim nozzles for close spacing, and controls with lots of zones, as well as a handful of new cost- and space-saving standard mold components

Fakuma Show News: Hot Runners & Tooling

Hot-runner nozzles, manifolds, and controls, as well as other mold components and a new tooling concept made their debut in Friedrichshafen.

Tooling at NPE: Valve Gates & Multi-Tips Top the News

There’s no letup in development of sophisticated hot-runner nozzles and controls. Here’s news in these and other tooling products at the show.

INJECTION MOLDING AT NPE: Molding Exhibits Show Off Cell Integration with Multiple Processes & Operations

If you’re interested in lightweight composites, IML, LSR, multi-shot, inmold assembly, barrier coinjection, micromolding, variotherm molding, foams, energy-saving presses, robots, hot runners, and tooling—they’re all here in force.

News in Hot Runners & Tooling At Fakuma 2014

Novelties included variable-pitch manifolds, mold servo controls, 3D printed plastic mold inserts, and flexible/formable cooling channels.

News in Hot Runners & Tooling at K 2013

Molds that break speed records for specific applications; hot runners for medical, packaging, and automotive parts; temperature and valve-gate controllers; and standardized mold components constitute a large grab-bag of news in the tooling category for injection molding at the Dusseldorf show.

TOOLING AT NPE: Hot Runners & Coinjection Grab Spotlight

Tooling innovations at NPE focused primarily on multi-cavity closure and medical applications, though there was also a substantial emphasis on large automotive and appliance parts.

Auxiliaries at NPE: New Solutions from Material Preparation To Post-Mold Operations

There will be an extraordinary range of new auxiliary equipment on display at the show.

Tooling at NPE: A Hot-Runner Bonanza in Orlando

Most of the emphasis is on valve gating and on doing more in less space. Other highlights include standardized mold components, some impressive feats of moldmaking creativity, and advances in mold simulation.

Bonanza of Hot Runners & Controls Introduced at K 2010 Show

At the world’s largest plastics show in Dusseldorf last fall, hot-runner and controller manufacturers introduced a flood of new developments in speed, size, accuracy, and reliability.

NPE News in Injection Molding

If a better machine can help your company beat challenging economic conditions, you’ll probably find it at NPE. And finding it will be easier, thanks to our editors’ efforts to sift out of some 2000 exhibits the most significant news in injection and blow molding, extrusion, compounding, and thermoforming.

Unbalanced? No Shortage of Ways to Fix Uneven Filling of Multi-Cavity Molds

The accepted ground rule for balancing melt flow in multi-cavity injection molds is to achieve equal flow distance from the injection point to each cavity.

NPE 2006 News Wrap-Up: Hot Shots: New Nozzles and Controls Add Sizzle to Runnerless Molding

Electrically driven valve pins, a low-cost alternative to valve-gating, mold-mounted temperature controllers, and new components for fast color changes are some of a host of new components and systems unveiled at the giant NPE 2006 show in Chicago this past June. (Some brand-new introductions since the show are also included in this report.) The news includes runnerless products aimed at everything from micromolding to shot weights up to 17.4 lb.

Ewikon Molding Technologies, Inc.

IS THIS YOUR COMPANY?

As Seen On Plastics Technology

Ewikon Molding Technologies, Inc. Supplies the Following Products

Trade Names Offered by Ewikon Molding Technologies, Inc.

Editorial, News, and Products