Davis-Standard Suppliers Showroom

Industrial Resin Recycling Diversifies by Looking Beyond Automotive

Recycler equips for new business in medical, housewares and carpeting.

Making Gains in the Drain Game

AWD blends extrusion and thermoforming technologies with plenty of home-brewed equipment and processes to keep water away from where it isn’t supposed to be.

Davis-Standard Taps Gettman to Head Global Services

Industry veteran to head up Davis’ newly created aftermarket business unit.

Davis-Standard Goes Carbon-Free

All North American facilities are powered by 100% carbon-free electricity.

Processing Megatrends Drive New Product Developments at NPE2024

It’s all about sustainability and the circular economy, and it will be on display in Orlando across all the major processes. But there will be plenty to see in automation, AI and machine learning as well.

Davis-Standard Expands Global Service Capabilities

Enhanced capabilities are designed to support all equipment manufactured by Davis-Standard and its subsidiaries.

ADG Solutions Expands Recycling Product Line

ADG will offer recycling equipment from Baracco and Break Machinery.

Generation Gap? Not at Packaging Personified

Started at a kitchen table and now in its third-generation of family involvement, this vertically integrated supplier of flexible packaging traces its success to closely aligning with customers and continually investing in new technology across its films, printing and converting operations.

Davis-Standard to be Systems Integrator for Novel EDI Flat Die

Die uses motorized lip-adjustment, said to be three to five times faster than heated-bolt adjustments.

Die-Lip Adjustment System Relies on Motorized Actuators

Nordson will debut an automated lip adjustment system for its EDI extrusion and fluid-coating dies at the K 2022 trade fair.

Green’s the Theme in Extrusion/Compounding

The drive toward circular economy is requiring processors to make more use of PCR. Machine builders at K—across all extrusion processes—will be highlighting innovations to help them do just that.

Upgraded Controls for Extrusion

Improvements include central control of all production parameters, process data analysis to assist with overall equipment effectiveness, and compatibility with obsolete controls installed on legacy Davis-Standard machinery.

Davis-Standard Launches Global Sustainability Initiative

Prioritizes resource conservation, and supports circular economy initiatives, social responsibility, and business collaboration.

Davis-Standard Appoints New V.P. for Canadian Businesses

Mike Brown responsible for executing the business operating plan, strategy and performance initiatives for Toronto-based subsidiaries Brampton Engineering, Deacro, and Gamma.

Next-Generation Gear Reducer is Sleek, Robust

Can accommodate a variety of extrusion requirements, including those with high and low torque, speeds and extrusion pressures.

Suppliers Team to Run Tubing, 3D Filament at Medical Show

At MD&M/Plastec West show in Anaheim, Conair to run extrusion line with technology partners Davis Standard and Zumbach Electronics.

Roll Stand Offers More Automation, Process Control

Processors benefit from technical and bottom line advantages of the roll stand’s inverted-down, multi-roll design.

Sleek Extruder for Coating Applications

Smaller footprint, lighter weight allows machine to be readily integrated into existing carriages or platforms.

Compact, High-Output Extruder

New extruder series features groove-feed section and offers up to 20% more output than previous designs.

New Owner for Davis-Standard

Private equity firm Gamut Capital Management buys extrusion machine builder from Onex.

A Coronavirus Comeback Restarts Growth at Medical Compounder

A slowdown in catheter production stopped growth in its tracks last year at Foster. But business has turned around quickly this year, and the medical compounder was prepared for the rebound.

Medical-Tubing Extruders Redesigned

Sleeker models simplify cleaning, maintenance, and operator accessibility.

Blow Molders Are Expanding

Three blow molders of large and small products are adding machines and manufacturing space.

Teel Plastics Continues in Battle Against Coronavirus

Newly installed Davis-Standard extrusion lines address swab-stick demand.

Profile Processor Combines People & Technology to Fuel Growth

Custom Profile started almost 30 years ago with one employee and one extruder, and has evolved into an international processing business with three plants serving a variety of markets. And plans are in the works to expand further.

Automated Crosshead for Elastomer Hose

Said to be engineered to minimize operator involvement and use of hand tools, thereby improving safety.

NewAge Adds Tubing Capacity in Coronavirus Fight

Processors add three new Davis-Standard silicone extruders to increase production of tubing line.

PPEs Are Here to Stay: Is Your Sheet Line Ready?

Follow these tips to evaluate your sheet extrusion lines to find out if you can expand into this market.

Extrusion: Auto Die for Coating Applications

Equipped with a motorized internal and external deckling system for safe and easy operation.

Conair, Partners Run TPE Tubing, ABS 3D Filament at Medical Show

Conair joins Davis-Standard and Zumbach to demo complete system that switched between tubing and filament runs at Plastec West Show in California.

Innovation, Customization & Sustainability: How Flex Films Focuses on U.S. Market

Global player in BOPET film has big plans for U.S. market with innovative products developed collaboratively with customers while paying heed to environmental concerns.

Davis-Standard Buys Builder of Slitters, Rewinders

Extrusion systems suppliers adds converting equipment supplier Deacro.

Kanarski to Lead Davis-Standard’s Technical Product Team

Will collaborate with suppliers and customers to evaluate market trends and capabilities, and develop technology accordingly.

Davis-Standard Adds James Johnson as Regional Sales Manager

‘Brings industry sales, manufacturing and adhesives experience to position.’

Extrusion: Two-Stage Screw Offers Distributive, Dissipative Mixing

New design from Davis-Standard offers outputs comparable to barrier screws at lower melt temperatures.

K 2019 Preview: Green's the Theme in Extrusion & Compounding

Themes of sustainability and the Circular Economy will be visible at the booths of many suppliers of extrusion and compounding equipment—film, in particular.

How to Use 'Mapping' to Troubleshoot Blown Film Problems

Three real-world case studies show how processors solved common problems in blown film via the mapping technique.

Seven-Layer Line Keys Processor's Expansion

Addition of Davis-Standard blown film line allows Findland’s Rani-Plast to expand customer base while offering greater flexibility.

Profile Processor Looks Beyond Windows and Doors

Intek Plastics intends to maintain a leadership position in its core fenestration business. At the same time, it’s on a mission to leverage its expertise in materials know-how, engineering, technology and customer collaboration to become a force in other profile extrusion markets as well.

Davis-Standard Beefs Up Lab Capabilities

New extruder, predictive-maintenance control system, added to tech center.

Davis-Standard Buys Thermoforming Machine Builder TSL

Can now offer sheet processors in food packaging turnkey package that includes extrusion and thermoforming machinery.

Wheeler, Barrier Screw Pioneer, Dies at 96

Career at Davis-Standard spanned six decades.

Feedscrew Upgrade Pumps Up Output for Hose Maker

New screws on four extruders boost throughput by more than 33%.

Dual-Strand Profile Line Gives Extruder Twice the Output

Steady growth in product demand and a full manufacturing floor required profile extruder Intralox to get creative when it needed to upgrade its equipment.

Extrusion: Continuous Monitoring For Real-Time Predictive Maintenance

Offers early notification of potential extruder components failures.

News Highlights from NPE2018

Developments in Industry 4.0, multi-layer preform molding, automation, LSR processing, and PP were among the major newsbreakers at May’s show. And one film processor finalized purchases of 13 new lines.

Davis-Standard Buys Brampton Engineering

Global supplier of extrusion systems expands in reach in blown film.

NPE2018 New Technology Focus: Single-Screw Extruders

What's new at the plastics industry's big trade show in single-screw extruders.

NPE2018 Unveiling: A Newly Branded and Focused Davis-Standard

Global extrusion systems supplier to be more focused on helping customers achieve success.

Plastics Hall of Fame: 10 Inspiring Stories

Last evening, at the Linda W. Chapin Theatre, the Plastics Academy inducted 10 new members into the Plastics Hall of Fame. Meet these outstanding individuals with remarkable stories. Each one teaches a lesson of hard work and creative thinking.

Robert Ackley: The Brain Behind an Empire in Extrusion

With hard work and steadfast leadership, Robert Ackley led Davis-Standard, LLC on the path of growth. For this new inductee of the Plastics Hall of Fame, plastics have done so much good for society.

Extrusion/Compounding at NPE2018: More…More…More!

More speed, flexibility and robustness. Across a gamut of extrusion applications, machine builders are introducing new machinery, components, and systems to dramatically raise the bar on productivity.

Running TPE Tubing Line Has Predictive, Preventative Maintenance Features

Real-time monitoring of vibration, oil composition, motor parameters, heater status, screw wear algorithm and energy consumption.

Around-the-Clock Aftermarket Services Offer Convenience and Improved Performance

At NPE2018, Davis-Standard highlights aftermarket and technical services including equipment upgrades, replacement parts, global field services, custom engineering, 24/7 customer service and research and technical services.

Extruder Series Aims to Boost Productivity

Direct drive groove feed extruder, TPE tubing line and competitively priced Super Blue system on display.

Davis-Standard Showing Wide Range of Technology, Services

Display features new equipment developments and extended product line capabilities made possible by virtue of recent acquisitions.

Extrusion: Next-Generation Control System

Modular design will repotedly improve control capabilities and application flexibility while maintaining an attractive price point

Coextrusion Line Demonstrates Technology for API Catheters

At trade show, suppliers team to show how to run a medical tube that includes medicine.

Extrusion: High-Speed Stretch-Film Line

Said to set ‘benchmark. for modular efficiency for high-grade stretch-film operations.

Making an Impact In Thin-Gauge Sheet

Creating a ‘virtually integrated supply chain’ that connects it with suppliers and customers has helped Impact Plastics add value to a wide range of sheet products, with a growing emphasis on PP.

Extrusion: Ironing-Roll Winder For Jumbo Rolls

Targets cast PP and barrier film applications.

A Culture Built on Innovation in Medical Tubing Extrusion

Microspec was born out of innovation, and 28 years later continues to set the global standard in medical tubing by developing high-precision multi-lumen catheters—among other tubing products—by refusing to believe “it can’t be done.”

Davis-Standard Opens Expanded Plant, Buys Maillefer

Machine builders adds space to accommodate blown film die manufacturing.

Mid South Extrusion Upgrades Film Capabilities

Film processor adds new Davis-Standard 6-in. extruder and makes a variety of other line upgrades.

Suppliers Running Precision Fluoropolymer Tubing at Medical Show

Catheter tubing with an x-ray stripe made with contributions from four equipment suppliers.

Suppliers Team to Run Precision Teflon Tubing at Medical Show

Apart from the triennial K Show, extrusion system suppliers don’t operate lines at trade fairs that much anymore.

Davis-Standard Ships First Large Accumulator-Head Machine from Fulton Plant

Largest machine yet built in this facility.

K 2016 Preview: Extrusion and Compounding

Regardless of what you might be extruding, the themes of speed and flexibility will loom large in extrusion at the giant show.

Profile Extruder Sees the Light

Rotuba exited the sheet business to focus on custom profiles for LED light fixtures. It now ranks as North America’s leading profile extruder in this burgeoning market.

Davis-Standard Expanding in Connecticut

Extrusion systems supplier adding 15,000 ft2 for manufacturing in Pawcatuck.

Davis-Standard Now Builds All Its Own Accumulator Heads

Advancing from assembly to complete production of all components.

Collaboration in Catheters

Medical Murray has developed innovative catheter technologies by working with its customers and down its supply chain.

Former Laminating Exec Starts Own Sheet Business

Apex 'fills void' by furnishing high-gloss sheet for laminating.

Pellet Production Is a Blast For This Processor

Maxi-Blast opens a plant with brand-new equipment to produce its own pellet blasting media.

Down in the Valley, Profiles Grow

Valley Extrusions carves niche in tight-tolerance, short-run tubing and profiles.

Davis-Standard Opens New Plant To Build Blow Molding Machines

D-S moves accumulator-head machine building to Fulton, N.Y.

Overcome the Challenges in Winding Flexible Packaging Film

Not all film webs are created equal. This creates challenges for both winder and operator. Here’s how to handle them.

SPI: Time To Refocus Plastics Recycling Efforts

Only about 9% of plastic waste was recycled from the municipal solid waste stream in 2012, according to the latest figures available from the U.S.

EXTRUSION AND COMPOUNDING NPE: Flexibility, Speed and Quality

Extrusion processors need more—of everything—to compete. And suppliers responded in force in Orlando.

EXTRUSION AND COMPOUNDING AT NPE: The Word Is ‘More’

As in speed, power, quality, flexibility, layers, and efficiency. Those are the trends across all extrusion processes.

On Site: 140 Years…And Growing Stronger

Now in its fifth generation of family ownership, this sheet extruder isn’t all about output. Its focus is on creating solutions in highly customized markets that aren’t immediately associated with sheet.

Teel Plastics: Where Science, Tech, Quality and Innovation Meet

This family-owned custom profile and tubing business controls its own destiny by controlling, well, everything.

Lots of Expansion Brewing In Film Extrusion

Firms adds more capacity to produce higher-tech films.

Extrusion/Compounding at K 2013: Having It All

Extrusion processors no longer need to chose among speed, quality, and flexibility, based on exhibits at K 2013.

K 2013 Preview: Extrusion, Compounding, Recycling

Across all extrusion technologies, expect to see new standards in speed, quality, flexibility, and efficiency in both energy and material usage.

Studies Boost Prospects For High-Speed Extrusion

Study shows that high-speed, single-screw extruder can significantly boost the processing capability of a small-diameter machine for a wide range of applications

‘Light’ Grooves Offer Big Boosts in Film Processing

Blown film is main target for technology billed as an option to smooth bore feedthroats in extrusion.

Extrusion & Compounding at NPE: Advances Push Efficiency Envelope

Blown film towers may have been scarce, but there was no shortage of new technology aimed at helping to make extrusion processors more profitable.

Extrusion & Compounding at NPE: More Output, More Flexibility, Less Energy

There won't be many blown-film lines running, but there is still much in the way of innovation going on in extrusion and compounding.

Rebuilt Film Line Boosts Output, Quality

Refurbishing has become an increasingly attractive option for processors looking to squeeze the most from their existing equipment.

On Site: Where Art, Science, And Customer Focus Meet

Business strategy at Danafilms involves a mix of art and science in blending resins, designing layer structures, and operating flexibility for both short and long runs.

New Barrel Heater/Cooler Saves ‘Juice' to Run an Extruder

New, patent-pending design is said to reduce both radiant and convection heat losses.

Novel Fuel Systems Power Blow Molder’s Growth

Nano technology gives The Plastics Group a leg up on developing fuel systems for non-automotive applications

Extrusion Vet Guthrie Supplies Recycling Equipment

Long-time extrusion industry executive Sandy Guthrie has started his own recycling equipment company.

On Site: Growth Through Innovation in Medical Tubing

By focusing on high-tech, quick-turnaround, turnkey solutions, Putnam Plastics has grown into a leader in the field of medical extrusion.

Compounding: New Torque Record Set At K '10

New twin from Coperion also pumps up output by 30%

EXTRUSION & COMPOUNDING: Five-Layer Film Structures Set to Supplant Three Layers?

In blown film, equipment and material suppliers have come together to push five-layer technology into non-barrier applications previously held by three-layer films.

K 2010 Preview, Extrusion More…Layers, Output & Quality

In most segments of extrusion technology, the word at K 2010 is more.

Old-School Thinking, New-Wave Technology Drive This Processor Into a ‘New Age’

It was the Fall of 2008.

Tests Show Direct-Drive Extruders Are Quieter, More Energy Efficient

Green machines may be coming to extrusion.

Extrusion at NPE 2003

NPE is typically a competitive display of the biggest, most dramatic equipment machine builders can muster.

Entrepreneur Puts Mixed-Polymer Recycling On Track to Success

Polywood Inc. in Edison, N.J., uses mixed recycled plastics to make fiber-reinforced structural profiles for railroad ties, I-beams, and decks.

First Microlayered Commodity Films

Advanced microlayer feedblock technology, used for over a decade to put dozens or hundreds of alternating layers into specialty films, has passed a new milestone.

NPE News in Blow Molding

While occupying a relatively small category of exhibits, blow molding will present no lack of innovation at NPE.

NPE News in Extrusion

This NPE show won’t have a lot of extruders on the floor, either running or static. Instead, look for videos and announcements of new technology. You will also find lots of ingenious peripheral devices to improve output and quality and save resin. Some will do all three, and cost less into the bargain.

K 2007 Extrusion: Extrusion Outputs Go Through the Roof

Dramatic production demonstrations of cast and blown film set throughput records on the show floor in Dusseldorf.

What's New at the Show in BLOW MOLDING

There will be a strong emphasis on energy savings in blow molding machinery at K 2007.

What's New at the Show in EXTRUSION

It’s all about higher speeds and higher outputs at this year’s “K” show in Germany.

More Filler, Less Resin: Bag Films Load Up to Cut Costs

Filler isn’t a bad word in T-shirt bags and can liners any more.

NPE 2006 News Wrap-Up: Extrusion

NPE 2006 presented a bevy of features to make film, sheet, pipe, and profile extrusion more efficient.

What to See at NPE 2006: Compounding and Mixing

Throughput capacities are going up for compounding equipment of all types.

Microlayer Films: New Uses for Hundreds of Layers

Early microlayer films gave an iridescent shimmer to decorative packaging. The newest films with hundreds and even thousands of layers are designed for gas barrier, uv blocking, electronic displays, and high-strength window-glass laminates. As applications grow, more processors want in on the action.

Nine-Layer Blown Film: Why It's a Challenge, What It Takes to Succeed

Eight years after nine-layer blown films were first introduced, only a handful of processors have mastered the challenges of making them. Machine suppliers are now setting up lab lines that could make entry easier.

Now It's Here: An Objective Test of Masterbatch Dispersion

There's a new grading system for color concentrates and additive masterbatches.

MDO Films: Lots of Promise, Big Challenges

Machine-direction orientation is still discovering new market opportunities. But the technical difficulties are so great that some big projects never came of age. New equipment could make it easier.

K 2004 Wrap-Up on Compounding: Quick Changes and Hybrids Add Versatility

New compounding technologies displayed at K 2004 included some unusual ways to broaden the range of products a twin-screw compounder can make.

K 2004 Extrusion: Outputs Rise, Downstream Units Gain Flexibility

The show was packed with new equipment for pipe and profile, including extruders redesigned for higher outputs and/or lower cost, plus new ways to adjust die and calibrator diameters or switch dies and calibrators more quickly.

Shhh ... Can You Hear the New Extruder Motors?

Silent, space-saving, energy-efficient, and high-torque, a new generation of ring-shaped motors is gaining a foothold in extrusion. A couple of hundred are already in use. Though most machine builders are reacting cautiously, adventurous processors are using them happily.

K 2004 News Preview: Extrusion

At K 2004, at least a half-dozen European machine builders will show new direct-drive extruders running gearless—or nearly gearless—drives with substantially higher rpm and output rates than conventional extruders of the same size.

Automatic Gauge Control: Comparing the Options

Until recently, blown-film processors looking for auto-gauge control had a choice of one segmented-die system, one IBC-based system, and several segmented air rings. Now there are at least nine auto-dies, including two for high-stalk bubbles, and lots of air-ring variations. All claim to improve gauge uniformity, but there are differences.

Davis-Standard

CONNECT

IS THIS YOUR COMPANY?

Video Gallery

Davis-Standard and Maillefer Medical Tubing Line

Thermoforming Trailblazers Industrial MFG Technician Apprenticeship 720p

Automotive Extrusion and Converting Capabilities

Davis-Standard Interview at #KShow2022

As Seen On Plastics Technology

Davis-Standard Supplies the Following Products

Editorial, News, and Products